2-Pack HDMI Port Replacement for Xbox One S
4.3Editor score
Two matching replacement ports
Basic repair tools included
Double-tested quality control
Xbox One S compatibility
In this guide
A damaged Xbox HDMI socket can interrupt video, audio, and signal recognition, but choosing the right replacement requires more than matching the connector shape. Console model, board layout, included repair tools, and soldering demands are essential considerations for restoring a dependable connection.
This guide compares ten replacement HDMI port options using the supplied compatibility information, customer ratings, repair features, package contents, and installation requirements. It covers parts for Xbox One S and Xbox One S Slim consoles, along with a clearly identified Series X option, so readers can distinguish usable matches from incompatible listings.
Each review explains who may benefit from a particular kit, what stands out in its package, and where installation may be difficult. Ratings and availability can change over time, so shoppers should verify the current listing, console model, connector layout, and seller details before purchasing or beginning a repair.
Top 3 Picks for Best Replacement Xbox One HDMI Port
2-Pack HDMI Port Replacement for Xbox One S Console
5.0Editor score
Two replacement HDMI ports
Comprehensive repair tool set
Solder wick included
Designed for Xbox One S
Series X HDMI Replacement Parts, M1087810
4.8Editor score
Series X M1087810 connector
Two replacement ports included
Universal repair tools included
Protective external packaging
Top 10 Best Replacement Xbox One HDMI Port in 2026 Compared
The comparison below organizes every listed option by intended console, package quantity, repair equipment, and installation requirement. It also distinguishes Xbox One S replacements from the dedicated Xbox Series X part so buyers can narrow the field before making a repair decision.
ProductsSpecificationsEditor scorePrice
Editor's Choice
Xbox One S Two-Port Repair Kit
Xbox One S model
Two HDMI ports
Repair tools included
Professional soldering needed
4.3Editor score
Editor's Choice
Xbox One Dual-Port Connector
Xbox One compatibility
Two HDMI ports
No tools stated
Soldering required
4.2Editor score
Best Budget
Xbox One S Comprehensive Repair Kit
Xbox One S model
Two HDMI ports
Solder wick included
Multiple repair tools
5.0Editor score
Xbox One Single-Port Connector
Xbox One compatibility
One HDMI port
No tools stated
Soldering required
4.1Editor score
Xbox One S High-Definition Ports
Xbox One S model
Two HDMI ports
Repair tool kit
Welding tools excluded
1.0Editor score
Xbox One S Two-Port Socket Pack
Xbox One S only
Two HDMI ports
Universal repair tools
Welding may be required
4.5Editor score
Original Xbox One S Slim Connector
Xbox One S Slim
One HDMI port
No tools stated
Special installation skill
3.7Editor score
Onyeh Xbox One S Port Kit
Xbox One S only
Two HDMI ports
Precision repair tools
Soldering required
4.5Editor score
Xbox Series X M1087810 Ports
Xbox Series X
M1087810 connector
Two HDMI ports
Repair tools included
4.8Editor score
Xbox One S Slim USA Port Pair
Xbox One S Slim
Two HDMI ports
No tools stated
Technician installation advised
1. Xbox One S Two-Port Repair Kit – Best Overall Replacement Xbox One HDMI Port
Xbox One S Two-Port Repair Kit
Two replacement HDMI ports
Xbox One S compatibility
Repair tool set included
Double-tested components
This two-pack replacement for the Xbox One S carries a 4.3 customer rating and is built around a straightforward proposition: provide two matching HDMI sockets and the basic equipment needed to open the console and begin the repair. The listing specifically identifies Xbox One S compatibility, making model confirmation especially important before ordering.
Pros
- Two ports provide a spare
- Ships with useful tools
- Targets specific console model
- Covers common signal symptoms
Cons
- Soldering experience is required
- Not suitable for other models
We may earn a commission when you buy through this link, at no additional cost to you.
Its strongest qualities are practical rather than decorative. Two ports mean a buyer can retain a spare if the first component is damaged during installation, while the included tools can make disassembly more convenient. The product information also states that each socket underwent double testing and quality control before shipment.
The listing describes the connector as useful for display interruptions such as flickering, distorted or unclear images, black screens, intermittent signal loss, and associated audio deterioration. Those symptoms can also originate from cables, software, settings, or the graphics output, so replacing the port should follow basic diagnostic troubleshooting rather than be the first action taken.
This is a strong choice for an Xbox One S owner who has already confirmed the fault and can arrange professional installation. It is less suitable for beginners because removing the old port and attaching the replacement requires soldering and careful reassembly. For a model-specific repair with a spare and basic tools, the package is notably complete.
A Spare Port Adds Practical Flexibility
Having two connectors is useful because a replacement socket can be damaged by excessive heat, a slipped tool, or incorrect handling. The second port provides backup and can make the repair less stressful without changing the console's external design.
Targeted Compatibility Reduces Guesswork
The listing clearly limits use to the Xbox One S and warns against other models. That focus is valuable because otherwise similar Xbox consoles can use different connector arrangements, making visual and model-number verification essential.
We may earn a commission when you buy through this link, at no additional cost to you.
2. Xbox One Dual-Port Connector – Convenient Two-Port Xbox One HDMI Repair
Xbox One Dual-Port Connector
Two replacement HDMI ports
Microsoft Xbox One support
Replacement connector format
Soldering required
This dual-port connector is rated 4.2 and is described as a replacement for the original Microsoft Xbox One console. It is a more narrowly presented option than the larger repair kits in the list because the supplied information does not mention screwdrivers, pry tools, solder wick, tweezers, or other installation accessories.
Pros
- Includes two matching ports
- Supports original Xbox One
- Simple replacement-focused package
- Can repair physical damage
Cons
- No repair tools are listed
- Soldering capability is mandatory
We may earn a commission when you buy through this link, at no additional cost to you.
The principal convenience comes from receiving two connectors. A spare can be valuable during a delicate desoldering and reflow process, particularly because the listing states that soldering is required. Buyers must still supply their own soldering equipment and any other tools needed to access the console's internal port.
The listing describes the part as suitable for an unresponsive, faulty, cracked, or damaged connector and claims an OEM-style fit and function. The exact phrasing may cause some confusion because another listing in this category uses similar language while targeting a different console generation, so the product images and compatibility notes should be checked together.
This option is most practical for someone who already owns suitable tools, understands how to work around delicate console electronics, and has positively identified the original Xbox One layout. It offers less support for a first-time repairer than the kits that include a fuller tool assortment.
Two Connectors Support Redundant Repairs
A second socket can be valuable if the first replacement is marked by a soldering fault or damaged during handling. It also allows a technician to preserve one unused connector while completing the installation.
Separate Tooling Keeps Package Simple
The absence of listed tools is not necessarily a drawback for experienced repairers who already own a soldering station, fine tips, desoldering supplies, and safe opening tools. It simply shifts preparation and equipment costs to the buyer.
We may earn a commission when you buy through this link, at no additional cost to you.
3. Xbox One S Comprehensive Repair Kit – Best Budget Replacement Xbox One HDMI Port
Xbox One S Comprehensive Repair Kit
Two HDMI replacement ports
Xbox One S fitment
Solder wick included
Seven-piece tool assortment
This Xbox One S kit has a 5.0 customer rating, making it the highest-rated option in the supplied data. Its package combines two replacement HDMI ports with a more comprehensive group of repair tools, creating a more self-contained repair setup than listings that provide connectors alone.
Pros
- Highest supplied customer rating
- Broadest included tool selection
- Two ports for replacement backup
- Supports desoldering and cleanup
Cons
- Installation guide is not included
- Soldering and disassembly are required
We may earn a commission when you buy through this link, at no additional cost to you.
The kit includes a 4.92-foot solder wick, a metal bit driver, a T8 bit, metal tweezers, a triangular pry tool, and a prying bar. That range of equipment supports the major stages of the job: opening the console, reaching the connector, removing the old component, and handling small parts with more control.
The main limitation is that the package does not include an installation manual, and soldering remains necessary. The seller recommends following step-by-step video tutorials, which is reasonable guidance for a visual task but cannot account for every variation in console revision, previous repair work, or internal cable placement.
For an Xbox One S owner seeking a broad repair bundle without sourcing a separate collection of basic tools, this is the most balanced pick. It is still not a beginner-friendly soldering kit, but its included equipment and strong customer rating make it a sensible first option to investigate before arranging professional labor.
The Tool Set Supports Each Repair Stage
Opening and prying tools improve access, precision bits and tweezers aid connector work, and the solder wick helps manage residual solder. Having these items together can reduce improvised handling around a small and sensitive component.
A Strong Rating Needs Technical Preparation
The 5.0 rating is encouraging, but the repair still requires competence. Review the included tools, watch a full teardown for the correct model, and arrange professional installation if you have no soldering experience.
We may earn a commission when you buy through this link, at no additional cost to you.
4. Xbox One Single-Port Connector – Straightforward Original Xbox One Repair Part
Xbox One Single-Port Connector
One replacement HDMI port
Microsoft Xbox One support
Focused connector package
Requires soldering work
This single-port replacement carries a 4.1 rating and is listed for the Microsoft Xbox One console. It provides a focused repair option for buyers who need one replacement socket and do not want to pay for additional connectors or a broader tool bundle.
Pros
- Simple single-component purchase
- Targets original Xbox One
- Suited to physical port damage
- Compact replacement-focused listing
Cons
- No spare connector included
- Repair tools are not listed
- Only one unit in package
We may earn a commission when you buy through this link, at no additional cost to you.
The supplied information describes the component as brand new and intended to replace a port that is unresponsive, faulty, cracked, or damaged. It also states that the replacement is designed to provide the fit and functionality of an OEM part, although actual performance will depend on correct installation and soldering quality.
Unlike the multi-port products, this listing includes only one connector and does not identify any included tools. That makes preparation more involved: the repairer may need soldering equipment, desoldering supplies, a suitable driver, and plastic opening tools in addition to the part itself.
Choose this option if the console has been positively identified as the original Xbox One and the installer already has proper equipment. It offers less flexibility than a two-port kit because there is no backup if the socket is damaged during installation, but it remains a direct replacement-oriented purchase.
A Focused Option for One Needed Part
Single-port packaging can suit a repairer with a clear, identified fault and a well-prepared workbench. It avoids carrying extra components that will not be used if the installation succeeds without incident.
Preparation Carries More Responsibility
Because tools and a spare are not listed, buyers should acquire everything before opening the console. A complete tool plan helps prevent rushed work around the connector and nearby board components.
We may earn a commission when you buy through this link, at no additional cost to you.
5. Xbox One S High-Definition Ports – Two-Port Signal Repair Kit
Xbox One S High-Definition Ports
Two replacement HDMI ports
Xbox One S compatibility
One repair tool kit
Welding tools not included
This two-port Xbox One S replacement has a 1.0 customer rating, so its customer feedback is notably weaker than that of the other listings. The product itself is described for repairing no-signal, flickering, black-screen, distorted-image, unclear-image, audio-loss, and damaged-connection problems.
Pros
- Includes two replacement ports
- Targets common signal failures
- Ships with basic repair tools
- Protective rigid outer box
Cons
- Lowest supplied customer rating
- Welding tools are excluded
- Requires soldering expertise
- Limited evidence from reviews
We may earn a commission when you buy through this link, at no additional cost to you.
Its package includes two HDMI port replacements and a repair tool kit, while explicitly excluding welding tools. It also mentions high-temperature-resistant materials, accurate machining, quality inspection, and double testing. Those manufacturing claims are useful context, but the low rating means shoppers should examine recent customer feedback carefully.
Installation requires basic soldering skills and disassembly experience, and the listing suggests learning from online guidance or hiring a professional. Its durable hard white box is intended to protect the parts during shipping and storage, although packaging does not address the more important question of whether the connector matches the user's exact console revision.
This product is not the leading recommendation based on the available rating. It may still be useful for a capable repairer who confirms fitment and sees why other buyers were dissatisfied, but a better-supported option with a broader tool set is generally the safer starting point for an Xbox One S owner.
Repair Scope Covers Multiple Symptoms
The listing connects the replacement with video, audio, recognition, and physical-damage symptoms. That breadth reflects how a damaged connector can interrupt several parts of the output signal at once.
Customer Feedback Changes the Recommendation
A low rating can reflect fitment, workmanship, seller communication, or installation experience, and the supplied data does not isolate the cause. The practical response is to read current reviews and compare them with the listing's fitment claims before ordering.
We may earn a commission when you buy through this link, at no additional cost to you.
6. Xbox One S Two-Port Socket Pack – Spare-Included Xbox One HDMI Option
Xbox One S Two-Port Socket Pack
Two replacement HDMI ports
Xbox One S compatibility
Universal repair tools
Protective outer packaging
This Xbox One S socket pack has a 4.5 rating and includes two HDMI ports along with a set of repair tools. The listing is unusually explicit that it does not fit the Series S version or the One X, reducing the risk of a model-category mistake when the listing title contains several console references.
Pros
- Solid 4.5 customer rating
- One port can remain spare
- Tools are included in package
- Explicitly excludes Series S
Cons
- Welding may be necessary
- No installation guide included
- Professional repair suggested
We may earn a commission when you buy through this link, at no additional cost to you.
A useful feature is keeping one port for spare storage, as suggested by the seller. It is a sensible approach for a component that may be exposed to heat and mechanical stress during removal. The outer package is also described as providing protection, while the tool set can assist with disassembly.
The product requires welding or soldering for a valid installation, and no instruction guide is included. The seller recommends a local repair shop when the buyer lacks experience. That candid guidance is appropriate because a console repair involves more than simply pushing a new connector into place.
For an Xbox One S owner who wants a spare and basic tools in the same purchase, this is a credible choice. The 4.5 rating is encouraging, but buyers should still verify the exact connector and board arrangement. Professional installation remains the lower-risk route for inexperienced users.
Keeping a Spare Reduces Repair Risk
A spare port allows a technician to finish the repair even if the first socket is damaged. It also provides a visible comparison point when checking the new component's pin alignment.
Model Exclusions Prevent Broad Assumptions
The listing states that the part is for Xbox One S and does not fit Series S or One X. Those explicit exclusions are helpful because the broad Xbox One family contains several materially different hardware designs.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Original Xbox One S Slim Connector – Simple Single-Part Slim Repair
Original Xbox One S Slim Connector
Single HDMI replacement port
Xbox One S Slim fitment
Six-month quality warranty
Special installation technique
This connector is specifically listed for the Xbox One S Slim and carries a 3.7 customer rating. It is a single-part package, making it one of the more streamlined options for a user who already knows the console and has the necessary soldering equipment ready.
Pros
- Specific Slim-model compatibility
- Single replacement component
- Six-month quality warranty
- Clear list of excluded models
Cons
- Lowest established multi-review rating
- No tools are stated
- Requires special installation skill
We may earn a commission when you buy through this link, at no additional cost to you.
The listing offers a six-month quality warranty, which adds a form of seller backing not stated for every option. It also clearly warns that proper installation requires special skill and techniques. Buyers are advised to check the model and product pictures before purchasing, making visual verification especially important.
Compatibility is narrowed to Xbox One S only. The seller explicitly excludes Xbox 360, Xbox 360 Slim, original Xbox One, Xbox One X, Series X, and Series S consoles. That long exclusion list prevents a potentially expensive misunderstanding and confirms that the connector is not a universal Xbox repair part.
This product is most appropriate for a confident repairer with an Xbox One S Slim and a fully prepared soldering setup. Its lower customer rating and lack of included tools mean it offers less margin for convenience than the multi-part kits. A professional technician can also use the stated warranty more effectively by retaining proof of purchase and installation details.
Clear Exclusions Simplify Identification
The listing distinguishes the connector from numerous Xbox models that look related at a family level. Buyers should still compare the console label and the physical port arrangement, but the explicit exclusions provide a useful first filter.
A Warranty Does Not Replace Skill
The six-month warranty may provide recourse if the purchased component is defective, but it does not make the installation easier. A poorly soldered joint can still produce unreliable video, audio, or signal detection.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Onyeh Xbox One S Port Kit – Well-Equipped Two-Port Repair Option
Onyeh Xbox One S Port Kit
Two replacement HDMI ports
Xbox One S compatibility
Precision tool assortment
Soldering required
The Onyeh kit combines two Xbox One S HDMI ports with a broad assortment of precision tools and earns a 4.5 customer rating. It is especially notable for the range of opening and handling equipment, including metal and plastic pry bars, a triangular opening tool, precision bits, tweezers, a brush, and a driver.
Pros
- Strong 4.5 customer rating
- Detailed precision tool set
- Two ports provide a backup
- Protective port casing
Cons
- No soldering iron included
- Installation manual is excluded
- Only compatible with One S
We may earn a commission when you buy through this link, at no additional cost to you.
The listing specifically excludes the original Xbox One, One X, Series X, and Series S. It also asks buyers to confirm the model before disassembly, which is a sensible precaution because a visually similar connector can still be arranged differently on the board.
The outer casing around each port is described as strong enough to protect the component during transit. That protection helps preserve the delicate pins before installation. The product is intended for ports that are faulty, broken, damaged, or worn out, and the included brush may help with debris handling during disassembly.
Soldering is required, no manual is included, and the listing recommends searching for a step-by-step video. This option suits a do-it-yourself repairer who wants a well-equipped package but already has a soldering station. It is less convenient for someone expecting a complete beginner repair course or technician-level support.
Precision Tools Support Delicate Work
Tweezers, precision bits, and multiple opening tools are particularly useful around a small board-mounted connector. They can improve control while reducing the chance of placing unnecessary force on nearby components.
The Spare Pair Supports Repeat Work
Two matching ports provide insurance against a damaged replacement and allow a technician to preserve the unused socket. The protective casing further reduces the chance that the delicate contacts are bent before installation.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Xbox Series X M1087810 Ports – Best Premium Replacement Xbox One HDMI Port
Xbox Series X M1087810 Ports
Series X M1087810 connector
Two HDMI replacement ports
Universal repair tools
Protective external packaging
This two-port HDMI replacement for the Xbox Series X has a 4.8 customer rating, placing it just behind the highest-rated kit in the supplied data. It is identified by the part number M1087810 and is explicitly designed for Xbox Series X hardware rather than the Xbox One S.
Pros
- Second-highest customer rating
- Specific M1087810 designation
- Includes two matching ports
- Repair tools are provided
Cons
- Not for Xbox One S
- Not for Series S or One X
- Professional welding may be needed
We may earn a commission when you buy through this link, at no additional cost to you.
The package includes two replacement ports, universal repair tools, and protective outer packaging. One port can be stored as a spare, while the tools support console disassembly and connector handling. The listing describes the pack as a solution for display problems, audio issues, and cracked or damaged HDMI connections.
Compatibility boundaries are clear: the product does not fit Series S or One X consoles. It also should not be treated as a generic Xbox One connector simply because both products belong to the Xbox ecosystem. The specific M1087810 identifier and console model must both be confirmed before purchase.
For a Series X owner, this is a well-supported and carefully specified repair option, which explains its premium designation within this list. The soldering or welding requirement remains substantial, and the seller recommends a local repair shop for inexperienced buyers. Model verification is non-negotiable.
Part Number Adds Installation Precision
M1087810 gives buyers a more concrete identifier than a generic Xbox description. It allows the listing, connector images, and physical replacement part to be compared before ordering, reducing reliance on family names alone.
Strong Support for Series X Repairs
The 4.8 rating, two-port quantity, and included tools create a reassuring package for a compatible Series X console. Those advantages only apply if the buyer confirms the exact model and avoids the excluded Series S and One X variants.
We may earn a commission when you buy through this link, at no additional cost to you.
10. Xbox One S Slim USA Port Pair – Technician-Oriented Dual Replacement
Xbox One S Slim USA Port Pair
Two replacement HDMI ports
Xbox One S Slim fitment
USA replacement designation
Technician installation advised
This listing supplies two replacement HDMI port socket interface connectors for the Microsoft Xbox One S Slim. It is described as a brand-new USA replacement part, and the listing does not provide a numeric customer rating, so its feedback cannot be compared directly with the rated products.
Pros
- Two matching replacement ports
- Specific Slim-console designation
- Suitable for technician repair
- Basic replacement-focused package
Cons
- No customer rating available
- Repair tools are not listed
- Soldering is required
- Installation difficulty acknowledged
We may earn a commission when you buy through this link, at no additional cost to you.
The seller explicitly states that installation can be difficult and does not recommend the item to people who are not technicians. Soldering is required, making this a service-part purchase rather than a casual consumer repair. A technician should still compare the listing images with the console's existing port before ordering.
Two connectors provide a useful backup for professional work. One can be installed while the other remains protected for future use, or the technician can attempt multiple components if a connector is damaged during the first installation.
This option is best for a repair shop, experienced electronics technician, or confident owner with proper tools. For a first-time repairer, the absence of included tools and the seller's own installation warning make a more instructional or better-equipped kit a safer choice. Verify current availability and customer feedback before ordering because no rating is supplied.
Designed Around Technical Service
The listing's recommendation against inexperienced purchases is a useful warning rather than a defect. It acknowledges that replacing a board-mounted connector involves precision work and a soldering process.
No Rating Means No Feedback Comparison
A missing rating prevents direct quality comparison with the nine rated products. Shoppers should therefore place greater weight on the connector images, model designation, seller information, warranty terms, and any current customer comments.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Replacement Xbox One HDMI Port
The correct replacement depends primarily on hardware compatibility, followed closely by repair difficulty and package contents. Buyers should identify their console before comparing connectors, then determine whether they have the equipment and experience needed to complete a board-level soldering repair safely.
Console Model and Revision
Xbox One S, original Xbox One, One X, Series X, and Series S use different hardware designs, so the words Xbox One alone are not sufficient model information. Check the label on the console, note whether it is the standard One S or the S Slim, and compare the replacement's product images with the installed port. Several listings explicitly exclude neighboring models, making those restrictions important rather than optional.
In short, verify the exact console and connector before ordering. A physically similar socket can still have different pin positions, surrounding components, or board arrangements.
Connector Shape and Pin Layout
The port should match the opening in the console housing, the number and arrangement of contacts, and the component placement around the board. Sellers may describe a part as an OEM-style replacement without supplying every dimensional detail, so photographs and model-specific repair guides are the best available references. Pay particular attention to bent or missing pins, which can make a new connector difficult to align.
In short, match both the housing and electrical contact layout. Do not rely on the connector's general appearance or listing title alone.
Soldering and Disassembly Skill
Every replacement reviewed here requires at least soldering, with several listings also emphasizing disassembly experience. Removing a heat-sensitive surface-mounted port involves desoldering many small joints, cleaning the pads, positioning the replacement accurately, and creating consistent connections. A soldering iron alone does not supply all the materials or knowledge needed for a clean board repair.
In short, expect a difficult electronics task. If you are uncertain, have a technician perform the installation or arrange a repair shop to source and fit the part.
Included Repair Tools
Tool coverage varies widely. The comprehensive One S kit includes solder wick, drivers, precision bits, tweezers, pry tools, and a prying bar, while other products provide only a small repair tool set or no stated tools at all. The best package for an experienced technician is not automatically the one with the most accessories; it is the one that supplies the tools missing from the technician's workbench without unnecessary extras.
In short, inventory your equipment before buying. A soldering station, suitable tips, desoldering supplies, drivers, and safe opening tools are more important than a long but mismatched accessory list.
Spare-Port Quantity
Two-port packages provide insurance because the replacement socket can be damaged by excessive heat, a slipped soldering tip, or pressure while it is positioned on the board. A spare is also useful if troubleshooting reveals a problem with the first component. Single-port options can still be correct, but they offer no immediate backup if the connector is compromised before or during installation.
In short, two ports are helpful for DIY work and professional service. A single port is sufficient only when the installer is experienced, equipped, and confident in handling the component.
Repair Scope and Symptom Diagnosis
Listings commonly mention no signal, black screens, flickering, distorted images, unclear video, audio loss, and physical damage. These symptoms can also come from a failed cable, incorrect input selection, display settings, software trouble, or another hardware issue. A replacement port is most relevant when the connector is visibly loose, cracked, bent, contaminated, or has failed after other causes have been ruled out.
In short, test the external path before opening the console. If a known-good cable and display do not resolve the problem, professional diagnosis can prevent an unnecessary replacement.
Seller Guidance and Warranty
Look for a listing that clearly states compatibility, package contents, installation requirements, and any warranty. The One S Slim single-part option mentions a six-month quality warranty, while several other products rely on listing instructions and customer feedback for support. A warranty can help with a defective component, but it may not cover labor, accidental damage, or installation performed by an unqualified person.
In short, save the listing and proof of purchase, and read the warranty terms before work begins. Clear seller guidance is especially valuable when no printed installation manual is supplied.
Customer Rating and Feedback
Ratings offer a useful but imperfect signal. The products in this guide range from 1.0 to 5.0, with one listing lacking a rating. A high score can support a purchase, but it does not prove fitment for every console revision. Recent reviews may also reveal recurring questions about pin alignment, included accessories, communication, or installation results that are not visible in the product bullets.
In short, use ratings as one input rather than a verdict. Read recent feedback, inspect seller responses, and confirm fitment with direct product photographs.
How to Use and Care for Your Replacement Xbox One HDMI Port
Before beginning, identify the exact console model and confirm that the replacement connector matches the part number, housing opening, and contact arrangement shown in the listing. Review a complete teardown for that model, gather the listed tools plus a soldering station, and disconnect the console from power. If you lack soldering experience, arrange professional installation rather than practicing on the console.
Once the port is accessible, remove the old component carefully while protecting nearby board parts. Follow a model-specific guide for desoldering, pad cleaning, connector orientation, and reflow work. Keep the replacement aligned with its contacts, install it squarely, and avoid applying force to the socket body when connecting a cable. Reassemble the console only after confirming that all internal cables and shields are correctly seated.
Test the repaired console with a known-good cable and compatible display before reinstalling the outer housing. Confirm that the display is detected, video remains stable, and audio plays without interruption. A replacement port should be handled by the connector housing rather than the cable plug, and the console should be kept in a ventilated, dry environment away from moisture and accidental impact.
Frequently Asked Questions
Are all replacement Xbox One HDMI ports compatible with every Xbox One console?
No. The Xbox One family includes original Xbox One, One S, One S Slim, One X, Series X, and Series S models with different connector arrangements. The products in this guide focus mainly on Xbox One S and One S Slim, while one option targets the Series X M1087810 connector. Always check the model label and compare the replacement images before ordering.
Can I install an Xbox One S HDMI port without soldering?
The listed replacement ports require soldering or welding to remove the old connector and attach the new one. Although some packages include pry tools, drivers, tweezers, or solder wick, they do not turn the job into a basic plug-in repair. If you do not have soldering and console-disassembly experience, a professional repair shop is the safer choice.
What symptoms indicate that the console HDMI port may need replacement?
Common indicators include no signal, intermittent black screens, flickering, distorted or unclear images, missing audio, and a port that is cracked, loose, dirty, or physically damaged. These symptoms can also be caused by cables, display settings, software, or other hardware, so test with a known-good setup before ordering. A visible connector fault strengthens the case for replacement.
Why is it useful to buy two replacement HDMI ports?
A spare provides protection against damage during desoldering, positioning, or installation. It is particularly helpful for a do-it-yourself repair because a dropped port, bent pin, or excessive heat can ruin the new component. Professional technicians also appreciate having a second matching socket available without making another order.
Do the included repair tools cover the entire replacement process?
Not necessarily. Some kits include drivers, pry tools, tweezers, precision bits, and solder wick, but most do not state that a soldering iron, soldering wire, solder remover, or other bench supplies are included. Check the package contents carefully and assemble a complete tool set before opening the console.
Will replacing the HDMI port repair every audio or display problem?
No. The port is only one part of the console's video and audio path. A replacement can address faults associated with a damaged or unreliable connector, but it cannot fix problems caused by software, settings, display hardware, internal cables, or unrelated board components. Basic troubleshooting should precede opening the console.
Is the Xbox Series X M1087810 port suitable for an Xbox One S?
No. The M1087810 option is specifically designed for Xbox Series X and is expressly excluded from compatibility with Series S and One X. It is also not a replacement for Xbox One S. Although the Series X pack appears in this roundup because it offers a well-specified HDMI repair, users should select it only for the exact console named in the listing.
Should I choose a single-port or two-port replacement kit?
A two-port kit is generally safer for a first-time repair because it includes a backup and may provide more tools. A single-port option can be sufficient for an experienced technician who has no need for a spare. Compare the tool set, warranty, model compatibility, and customer feedback rather than choosing solely by the number of ports.
Final Thoughts on Choosing the Best Replacement Xbox One HDMI Port
The 2-Pack HDMI Port Replacement for Xbox One S Console stands out as the strongest all-around option because it combines a 5.0 rating with two connectors and a broad tool assortment. The Xbox One S Two-Port Repair Kit offers a well-supported alternative, while the Series X M1087810 pack leads the dedicated Series X category with a 4.8 rating and clear part identification.
Prioritize exact console compatibility before considering tools, quantity, or customer feedback. A correctly matched connector matters far more than extra accessories, and no kit can remove the need for careful soldering. If you cannot confidently complete board-level work, professional installation is likely to cost less than a failed repair or repeated damage.
Finally, check the current listing, customer reviews, seller information, warranty, and package contents before purchasing, because availability and product details can change. Compare the connector photographs with the installed port, and use the current information to confirm that the chosen replacement matches the intended Xbox One or Series X model.